ROCKOTE
Rockote is a high strength epoxy coating designed especially for sealing new or used concrete floors. It is also an excellent topcoat material over most epoxy flooring systems. This two component 100% solids epoxy provides a tough, sealed, non-porous surface. It can be installed from 10 mils to any desired thickness in one or more coats without effecting its properties. Rockote resists abrasions, oil, gasoline and many diluted acids and solvents. Various textures are available, ranging from skid-resistant to smooth.
BENEFITS:
-Tenacious adhesion better than urethane or acrylic sealers.
-Stops water and moisture from penetrating concrete.
-Available in water clear or pigmented.
-The high gloss finish reflects a greater amount of light.
-Prevents floors from dusting.
-Easy cleaning and maintenance.
-Easy application.
TYPICAL USES:
Epoxy sealer is suitable for use in:
-Warehouses -Parking ramps
-Auditoriums -Bottling plants
-Battery rooms -Garages and hangars
-Loading docks -Service stations
-Walkways -Car wash areas
-Machine shops -Laundries
LIMITATIONS:
-Do not apply at temperatures below 50 degrees F.
-Mix only amounts that can be applied in 30 minutes.
-Surface must be properly prepared before application.
PHYSICAL PROPERTIES/TECHNICAL DATA
Mix Ratio 2:1 by volume
Pot Life @ 77f 30 min
Initial Set @77f 6-8 hrs
Color Clear or pigmented
Compressive Strength (ASTM D 695) 12,500 psi minimum @ 7 days
Tensile Strength (ASTM D638) 3950 psi minimum
Tensile Elongation (ASTM D 638) 5
Hardness Shore D (ASTM D 2240) 85-90
Flexural Strength (ASTM D790) 24,500 psi
Indention (MIL-D-3134F) No Indentation
Abrasive Resistance (ASTM D1044) .040 grams
Taper Abrader c-10 Wheel 100 gram load 1,000 cycles
Water Absorption (ASTM C413) .1
Coverage (16 mils thick) 100 SF/gallon (theoretical)
Shelf Life 2 yrs unopened container 77f